Can “double hung” replacement windows be turned 90 degrees and installed as sliders?

Sherry L asked:


We have an opportunity to buy some replacement windows that was originally purchased as vinyl double hung. However, the windows will only work for our application if we turned them 90 degrees and install as slider windows.

Twanna

Share and Enjoy:

• 
• 
• 
• 
• 
• 

Tags: Slider, Sliders, Vinyl Windows

This entry was posted on Friday, March 13th, 2009 at 1:02 pm and is filed under Vinyl Windows. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

3 Responses to “Can “double hung” replacement windows be turned 90 degrees and installed as sliders?”

1. Darkgoth Says:
   March 13th, 2009 at 9:02 pm

   Freeman

   sure anything could work…but would it really be what you want?

2. T squared Says:
   March 14th, 2009 at 3:53 am

   Kayce

   yes, I’ve done it. keep the jam, now at the top and bottom as tight as you can or the sash will slightly rock. It’s not an optimal situation but ut does work.

3. william v Says:
   March 15th, 2009 at 5:08 pm

   Lashanda

   NO !!!! Absolutely not! Problem one. When you unlatch the sashes they will slam open due to the balance tension. Problem two. Windows have an engineered weep system that in said configuration would be compromised. Water inside the abode would probably be frowned upon!!!!